Crank Case; Oil Seal Inspection And Removal; Oil Seal Installation - Suzuki RM 250 2003 Owner's Service Manual

CRANK CASE

OIL SEAL INSPECTION AND REMOVAL

• Inspect the oil seal lips for wear and damage.
• Remove the oil seal with the special tool.
" 09913-50121: Oil seal remover

OIL SEAL INSTALLATION

• Fit a new oil seal with the special tool.
• Apply grease to the oil seal lip.
" 09913-70210: Bearing installer set
NOTE:
Be sure to check the direction of the crank shaft bearing oil seals
before fitting them.
TRANSMISSION AND CRANKSHAFT
Left seal Right seal
Outside Outside
8-9