Mirrors And Sun Visor - GMC 1976 ZEO 6083 Maintenance Manual

1- 2 6 BODY
Figure 39-Seat Attaching Bolts
2. Position spacers and install retaining bolts to
weld nuts in base of seat . Tighten securely .
PEDESTAL REPLACEMENT
REMOVAL
1 . Remove seat as described above.
MIRRORS AND SUN VISOR
INSIDE REAR VIEW MIRROR
REMOVAL
1 . Loosen set screw at base of mirror .
2 . Slide mirror to the rear and remove .
INSTALLATION
1 . Position mirror on sun visor and mirror
mounting bracket.
2. Tighten set screw.
OUTSIDE REARVIEW MIRROR
(FIGURE 40)
The entire mirror assembly can be removed by
removing four retaining bolts from the mirror
bracket. Install by replacing these four bolts.
2. Remove twelve nuts and bolts from base of
pedestal . (Access to nuts can be made through the
engine access cover)
3. Remove pedestal .
INSTALLATION
1 . Position pedestal over mounting holes.
2. Install nuts and bolts to retain pedestal .
3. Install seat as described previously in this sec-
tion .
DUAL PASSENGER SEAT
REPLACEMENT
The dual passenger seat is removed in the same
manner as the driver and single passenger seat, refer
to the preceding procedures for removal and installa-
tion .
The pedestal for the dual passenger seat is also
removed by the same method as the driver and single
passenger seat pedestal .
Either the mirror head or support arm can be
removed by removing the acorn nut as shown in
Figure 40.
Figure 40-Exterior Mirror