Entrance Door - GMC 1976 ZEO 6083 Maintenance Manual

Figure 27-Windshield Wiper Motor
3 . Apply pipe joint sealer to filter threads 1/8"
from end of filter as shown in Figure 28 .
4. Carefully screw filter into wiper motor .
Figure 29-Entrance Door Adjustment-Vertical
ENTRANCE DOOR
Mimi
5/8-18 NUT SEALER
Figure 28-Windshield Wiper Motor Filter
NOTE :
Do not get foreign material on motor end
of filter .
5. Torque filter to 25 ft . lbs. using a 5/8-18 nut.
6 . Reconnect hose to filter .
ADJUSTMENT
BODY 1- 17
1/8
A-3931
The door may be adjusted vertically by loosening
the bolts at both hinges as shown in Figure . 29 .
Horizontal adjustment may be made by shim-
ming or removing metal at the shaded area of the
hinges as shown in Figure 30 .
2. Remove door .
DOOR SEAL
The entrance door seal is replaceable. Clean old
seal from door frame, apply adhesive to frame then
install new seal .
DOOR REMOVAL
1 . Remove four (4) hinge to door frame attaching
bolts.