GMC 1976 ZEO 6083 Maintenance Manual page 316

FUEL PUMP ECCENTRIC
OIL FILLER TUBE BAFFLE
TIMING CHAIN
GASKET
STUD-50 FT . LBS
CAMSHAFT SPROCKET
OIL DEFLECTOR (FRONT)
35 FT. LBS.
OIL PUMP DRIVE SHAFT
A-2328
4. Remove shroud seal retainer strap.
5. Roll shroud to venturi ring seal over shroud .
6. Remove fan clutch assembly .
7. Remove venturi ring .
8 . Remove engine drive belts.
9. Remove crankshaft pulley and harmonic ba-
lancer. See "Crankshaft Pulley" and "Harmonic Ba-
lancer" earlier in this section.
10 . Remove oil pan. Refer to "Oil Pan" earlier in
this section.
11 . Remove front cover to block attaching bolts
and remove front cover, timing indicator and water
pump assembly (See figure 56).
INSTALLATION
1 . Install new cover gasket . Apply 1050026 or
equivalent, sealer to gasket around water holes and
place gasket on block.
2. Install front - cover, timing indicator and water
pump assembly . Apply engine oil to bolts and torque
bolts as shown in Figure 57 .
Figure 56-Engine Front Cover Exploded View
Figure 57-Engine Front Cover Bolts
ENGINE 6A- 5 1