Fault Messages - Miele PW 6321 Operating And Installation Instructions

Display Maintenance notice
^ Call Technical Service for maintenance if
the display shows the following message
after turning the machine on.
Maintenance notice
§
Call Technical Service.
The display goes out after 5 seconds.
Frequently asked questions

Fault messages

,
Repairs to electrical or steam
appliances should only be carried out by
a Miele authorized technician in
accordance with local and national safety
regulations. Unauthorized repairs could
cause injury or machine damage. The
manufacturer cannot be held responsible
A
for unauthorized work.
Faults that occur before or after the start of a
program flash in the display.
If the display remains off, the dryer has no
power.
^ Check the plug, main switch and fuses
on-site.
Power failure
y
Program stop
Press Start.
^ Press h "Start".
This fault message can also indicate that the
overload cut-out of the drive motors has over
heated.
^ Allow the motor to cool.
f
33