Chip Card Use; Card Operation - Miele PW 6321 Operating And Installation Instructions

Chip card use

Chip cards are programmed to a machine
type. Empty cards can be used with any
machine.
^ Press l "On" to turn the washer on.
The Welcome screen shows.
^ Insert the card, arrow first, into the card
reader.
The display shows the list of programs on
the card, example:

Card operation

17 Fire department clothing 113 °F
18 Wrinkle-free
ß
i
^ Turn the jog shuttle to select a program.
Press the jog shuttle to confirm the
selection.
^ Press the h "Start" button to begin the
program.
^ Remove the card from the card reader.
Once the program is finished it will be
deleted from the machines memory.
,
Do not insert any items other than the
card into the card reader.
24
140 °F
FC A
If the card was inserted the wrong way, the
display shows:
Card fault
§
Reinsert card correctly in card reader.
ü
i
^ Reinsert the card properly into the card
reader.
If the card is not suitable for this type of
machine, the display shows:
Card operation
Programs on the card are only
suitable for machine type PW 6101
^ Insert a card suitable for this machine
type.
Card operation
For laundry loads which need special wash
procedures, a single special program is
written on a card which is then used to run
the program.
This function blocks all machine programs.
The washer runs only the program saved on
the card.
The function "Load" can be activated in the
supervisor level. The machine will only
accept cards in this function.
f
A