Table of Contents
Advertisement
6 Send from Folder
Printing Files in a Folder
You can print selected files in a folder.
1
Select files on the [Folder - File List] screen.
2
Select [Print] or [Batch Print].
Note
For information on [Print] and [Batch Print], refer to
"Print" (P.306) and "Batch Print" (P.307),
respectively.
3
Select any option. Enter the number of print
sets using the numeric keypad, if necessary.
6
4
Click [Print].
Note
Print
Allows you to set printing.
Paper Supply
Allows you to select paper.
2 Sided Printing
Allows you to set 2-sided printing.
Output
Allows you to set stapling, punching, and a tray where the output is delivered.
Note
For examples of the settings of stapling and hole punching, refer to "When stapling/punching holes"
(P.308).
File Details
Displays the [File Details] screen. Select a file from the list to check its preview image.
306
• When multiple files are selected, [Batch
Print] allows you to print the selected files
as a single file, while [Print] allows you to
print them as separate files.
• When a file stored by [Store in Remote Folder] of a print driver is printed, the settings
specified on the control panel or CentreWare Internet Services will override the settings
specified on the print driver except the [Pages Per Sheet (N-Up)], [Skip Blank Page], and
print position settings.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Advertisement
Table of Contents
