Table of Contents
Advertisement
No.
Component
8
Tray 1, 2, 3, 4
9
Locking casters
10
Tray 5
11
Side tray (Optional)
12
Stylus pen holder
13
Stylus pen
Side and rear views of the machine
8
9
10
11
12
13
14
No.
Component
1
Top left cover E
2
Top left cover A
3
Top left cover D
4
Bottom left cover B
5
Bottom left cover C
6
Adjusting foot
Function
Load paper here.
Note
• The Envelope Tray (optional) can be inserted into
the slot for Tray 1. The standard Tray 1 cannot be
used when the Envelope Tray is used.
Used for locking the wheels of the machine. Lock these
casters after moving the machine to its installation site.
Used for loading non-standard paper, such as
postcards, that cannot be loaded in Trays 1 to 4.
Stacks up copies and prints with the face upward.
Stores the stylus pen.
Used for touching the touch screen on the control panel
to configure settings.
Note
• You can directly touch the touch screen not only
with the stylus pen but also with a finger.
7
Function
Open this cover to clear paper jams.
Open this cover by lifting up the release lever to clear
paper jams.
Open this cover by lifting up the release lever to clear
paper jams.
Open this cover to clear paper jams.
Open this cover to clear paper jams.
Prevents the machine from toppling over. Move the
machine to its installation site and then rotate this
adjuster in clockwise direction until it touches a floor.
Machine Components
1
2
3
4
5
6
39
2
Advertisement
Table of Contents
