Entering Specific Symbols - Fuji Xerox DocuCentre-IV 3065 User Manual

2
Select [Shift], and enter in the following
format: "<", "port number", ">", "recipient's
telephone number".
The following shows the corresponding lines
to each port:
<1>: Line 1
<2>: Line 2
<3>: Line 3
Example when using Line 1:
<1>XXXXXXXXXX

Entering Specific Symbols

When specifying a recipient, you can use the following features to enter specific
symbols on the touch screen.
Feature
Enter pause
Transmit using a
password
Transmit DTMF
signal
When using the DTMF method, use specific symbols. For information on the DTMF method, refer to
"Remote Folder (Using Remote Folder)" (P.199) and "Broadcast" (P.213).
Button Function
- or Used to enter a pause.
<Pause> (-) One pause is 3 seconds.
You can enter pauses of
6 seconds, 9 seconds,
etc. with additional
button presses.
S When a password has
been set, transmission
will start only if the
password matches the
ID number on the remote
terminal.
! Used to transmit the
DTMF signal.
Fax/Internet Fax
Input method
Press the <Pause>
button.
(Example)
0-123 ...
0--123 ...
1. Select [New
Recipients] on the
[Fax/Internet Fax]
screen to display the
keyboard.
2. Select [S].
(Example)
0312345678S12345678
1. Select [New
Recipients] on the
[Fax/Internet Fax]
screen to display the
keyboard.
2. Select [More
Characters].
3. Select [!].
(Example)
0311123456!123#
179
4