Infrared Connector: Ir; Power Connector: Power - FIC PAK-2102 Preliminary Manual

PAK-2102 Mainboard Manual

Infrared Connector: IR

This 2x5 pin male connector is used for connecting to the infrared (SIR) port and
allows transmission of data to another system which also supports the SIR
feature.

Power Connector: POWER

This 12 pin block connector is used for connecting to the standard 5V power
supply. In the picture below, notice that, in most cases, there are two marks P8
and P9 on the surface of the connector. You have to insert the P8 plug into the
P8 section of the connector, and so forth for P9. Two black wires must be in the
middle.
36