Advertisement
GB
76
ASSEMBLY
Installation of oven (option)
1
2
Installing convection fascia (option)
1
Open the hatch and install the convector fascia with the
retaining brackets angled as shown.
Hold the oven door in place on the threaded
pin. Hook the top hinge in place and
loosely tighten one of the screws. Close
the oven door and adjust it so that it aligns
horizontally. Then open it carefully and
tighten both screws.
Place the baking sheet in the oven. If
necessary, adjust the height of the baking
sheet by turning the adjusting screw at the
bottom of the oven unit.
2
Insert the convection fascia upwards first so that the locking
spring comes inside the front panel of the stove and push the
convection fascia lightly upwards. Then press the fascia in and
allow it to slide into place.
Hide quick links:
Advertisement
