Contura C 620S Installation Instruction page 14

GB
78 ASSEMBLY
Installation of drawer (option)
!
When installing the drawer, the
knockout in the back panel must
always be removed for the supply of
convection air.
2
Hook the pull-out unit into place over the rear Allen
screws. Screw the unit into place.
1
Slacken off the rear Allen screws three turns. Place
the pull-out unit on the base plate.
3
Install the drawer on the pull-out unit using the four
Allen screws. Adjust the drawer so that it is centrally
positioned, then tighten the screws.
x 3