Installation Distances To Walls And Ceiling - Contura C 460 Installation Instruction

Installation distances to walls and ceiling

Lay the metal template as a base-plate (see page 8) where the
stove is to stand and measure to make sure that the stove is
no closer to the wall than the minimum distances specified in
the diagrams below. A hole in the template marks the centre
Centre mark for
chimney
1040
Floor plate (accessory)
Against non-combustible wall
Fire-retardant wall of
brick or concrete
Combustible wall
250
330
775
Against combustible wall
Combustible wall
250
330
775
Centre mark for
chimney
Centre mark for
chimney
Floor plate (accessory)
385
190
305
Air inlet Ø64
700
of the chimney. The rear edge of the template must be flush in
line with the rear edge of the concrete surround. Allow at least
1.0 metre from the stove door to any combustible part of the
building structure or interior fittings.
Centre mark for
Combustible wall
chimney
Floor plate (accessory)
520
Air inlet Ø64
445
740
890
Against combustible wall with
protective screen
1200 (min 900)
250
330
775
410
305
Air inlet Ø64
626
700
470
Ø280
Air inlet Ø64
445
890
GB
3
Wall-protection panel
C-460 (accessory)
Floor plate (accessory)