Fitting The Fire-Box Surrond; Fitting The Smoke Baffle - Contura C 460 Installation Instruction

GB
6
Lift the door upwards until it disengages from the lower hinge.
Fitting the fi re-box surrond
Remove the cast-iron cover strips below the side windows.
Fit the rear fire-brick.
Fitting the smoke ba± e
Raise the folded front edge of the smoke baffle
up over the side pegs. Then lift the rear edge of
the baffle up over the vermiculite holder.
!
When correctly placed on top of the
supporting pegs, the baffle slopes
upwards from the back to the front.
Ease the bottom of the door slightly sideways until it clears the
hinge pin. Lower the door to disengage it completely.
Unscrew the metal brackets from the rear edge of the side
windows.
LEK
Slot the two front fire-bricks. Screw the retaining brackets back
into place and replace the cover strips.
Vermiculitehållare
Vermiculite holder
LEK
Stödtapp, sida
Side peg
LEK
Vermiculitehållare
Vermiculite
holder