Unpacking - Contura C 460 Installation Instruction

Unpacking

The cast-iron door and fire-bed may be re moved to make the stove
lighter and easier to move.
First remove all the components from the fire-box and place the
steel profiles and metal plates on one side.
Unsecure the stove on the delivery pallet and fit the extension legs
using the hexagon screw s. By fitting these legs before removing
the stove from the pallet you can avoid scratches to the floor. Raise
the fire-box to a height of 87 mm and tighten the lock-nut.
1
2
Remove the grate disc by lifting the edge furthest away from
the draught control bar.
Unscrew the metal brackets from the rear edge of the side
windows.
1
2
2
3
LEK
Lift and transport the stove as
1
3
3
Remove the cast-iron cover strips below the side windows.
Lift the cast-iron fire-bed at one side and tilt it so that it can be
removed through the door opening.
shown in the sketch!
LEK
GB
5