Advertisement
Quick Links
Advertisement
Related Manuals for Contura C 590T
Summary of Contents for Contura C 590T
- Page 1 Installation instruction C 590T www.contura.eu...
- Page 2 See rating plate on the stove Intended area of use Heating of rooms in residential buildings Fuel Wood MANUFACTURER Name NIBE AB / Contura Address Box 134, Skulptörvägen 10 SE-285 23 Markaryd, Sweden CHECKS According to AVCP System 3 European standard...
-
Page 3: Table Of Contents
A warm welcome to the Contura family. We hope you will get a great deal of pleasure from your new stove. As a new owner of a Contura stove, you have secured a product with timeless design and long service life. -
Page 4: Technical Details
FACTS Important to remember! Technical details Installation by authorised Structural support Effect 3-7kW Nominal effect 5 kW technician Check that the wood joists are strong Efficiency up to 79% enough to bear the weight of the stove and This manual contains instructions about chimney. - Page 5 REMOVAL How to remove the heat deflector How to remove the hearth surround (Vermiculite) Handle the vermiculite with care. Lift the smoke baffle with one hand whilst removing the sides pieces. Reinstall in reverse order...
-
Page 6: Connection To Chimney
CHIMNEY Connection to chimney • The stove meets the requirements for connecting to chimneys • A flue with sharp bends and horizontal routing reduces the dimensioned for 350°C flue gas temperature. draught in the chimney. The maximum horizontal flue is 1 m, on the condition that the vertical flue length is at least 5 m. -
Page 7: Supply Of Combustion Air
A 1 m length of condensation-insulated ducting for combustion air is available as an accessory. C 590T In the back and floor plates there are knockouts that must be removed to insert pipes or for air supply if the stove is equipped with a lower hatch and/or fan (accessory). -
Page 8: Installation Distances
INSTALLATION DISTANCES Installation distances C 590T Combustible roof WHEN INSTALLING TURNTABLE (OPTION) the The minimum distance in front of the stove opening to combustible following installation distances do not apply. See the separate installation instructions for parts of the building or interior turntable. -
Page 9: Assembly
ASSEMBLY Installing C 590T... - Page 10 ASSEMBLY...
- Page 11 ASSEMBLY...
-
Page 12: Installing The Soapstone
ASSEMBLY 603226 Installing the soapstone 603224 Place the insert on the hearth plate and check the installation distance. Connection to the chimney from the rear of the stove body 603225 is carried out prior to installing the soapstone. When the connecting the chimney to the top of the stove body the soapstone surround must be installed first. - Page 13 ASSEMBLY...
- Page 14 ASSEMBLY Position the supplied rating plate as illustrated. Final inspection of the installation It is extremely important that the installation is inspected by an authorised chimney sweep before the stove is used. Also read the ”Lighting instructions”, before lighting for the first time.
-
Page 15: Installing The Lower Cover
ASSEMBLY Installing the lower cover... - Page 16 NIBE AB · Box 134 · 285 23 Markaryd · Sweden www.contura.eu Contura reserves the right to change dimensions and procedures described in these instructions at any time without 811110 IAV SE-EX C590T - 5 special notice.