Network Alarms; Forward Alarms - AMX NMX-ENC-1100 Instruction Manual

Network Alarms

The following table lists the Network alarms.
Network Alarms
Code Priority
1 M
2 M
3 C
4 M

Forward Alarms

The following table lists the Forward alarms.
Forward Alarms
Code Priority
1 H
2 H
3 H
4 H
5 H
6 H
7 H
8 H
9 L
10 L
11 L
12 L
13 L
14 M
15 L
16 L
17 L
Instruction Manual - NMX-ENC H.264 Encoder
Text
Port <num> is plugged in
Port <num> is unplugged
All Ethernet ports are disconnected
Added multicast route to routing table
Text
One or more FTP parameters is invalid
Internal communication error
Recording directory not found
Error attempting to FTP file <filename>
Unknown forwarding error
FTP transfer terminated
<ftpput error log>
Forwarding task is unresponsive
Forwarding paused
Store-and-forward enabled
Store-and-forward disabled
Forwarding paused
Forwarding resumed
Forwarding scheduling interval not between 1 and
12 hours
Forwarding successfully completed
Forwarding initiated
Forwarding interrupted by disable or configuration
changes
Description
Port <num> is connected to a valid network capable device.
Port <num> is connected to a valid network capable device.
None of the ports are connected to a network device.
Route table was modified to add the multicast path.
Description
The forwarding URL, port number, or user name is blank.
There is a problem with coordinating the internal activities
necessary to conduct FTP file forwarding.
The directory containing the files to forward could not be
located.
An error occurred while transferring one of the files.
An error occurred during the FTP forwarding activity, but the
error could not be identified.
Files were being transferred when an external event caused
the FTP forwarding to be stopped before completion.
Printout of an FTP error as reported by the ftpput process.
The process associated with FTP forwarding is in an unknown
state.
FTP file forwarding has been configured to run when
applicable.
FTP file forwarding has been configured to run when
applicable.
FTP file forwarding has been configured not to run.
FTP file forwarding activity has been blocked by some
external event.
FTP file forwarding has been unblocked by an external event.
Warning that the entered values for interval scheduling are
not within the allowed limits.
After forwarding has been initiated, all files appear to be
successfully transferred.
Conditions for file forwarding have been met and an attempt
to FTP the files is being made.
A change in one or more FTP forwarding configuration values
has caused re-evaluation of the forwarding requirements and
reset the forwarding process.
Appendix C - Alarms
58