Telnet Commands (Cont.)
Command
sc
session
ssntimeout
Instruction Manual - NMX-ENC H.264 Encoder
Description
Internally issues a NetLinx SEND_COMMAND to the encoder.
Usage:
> sc <port> <SEND_COMMAND>
Example:
> sc 1 VIDIN_FORMAT-HDMI
Sets the video input format for port 1 to HDMI. See the Accessing the Encoder via Telnet section on page 48 for more
examples on using the sc command.
Lists the session parameters.
Sets the number of minutes until the inactive session is terminated. You can set any amount of time up to 24 hours.
Usage:
> ssntimeout <number of minutes>
NOTE: Entering 0 for the number of minutes sets no timeout.
Programming
49