Webconsole Interface; Accessing The Webconsole - AMX NMX-ENC-1100 Instruction Manual

WebConsole Interface

The encoder features an on-board WebConsole that allows you to configure the device and make various adjustments to audio/
video settings. The WebConsole is accessed via a web browser on a PC that has network access to the encoder. You can access the
WebConsole by entering the IP address of the encoder into a web browser.

Accessing the WebConsole

From any PC that has access to the LAN that the target encoder resides on:
1. Open a web browser and type the IP Address of the encoder in the Address Bar. (See the Retrieving the IP Address of the
Encoder section on page 25 for more information.)
NOTE: Due to some web browsers retaining stale DNS data, it is recommended you manage the encoder by using the IP address of the
encoder in the web browser.
2. Press Enter to access WebConsole for the encoder. A security dialog opens.
3. Enter the user name and password for the encoder into their respective text boxes. The user name is admin and the password
is 1988. The WebConsole page opens (FIG. 25).
NMX-ENC WebConsole
FIG. 25
Instruction Manual - NMX-ENC H.264 Encoder
Web Configuration
26