NetLinx Options (Cont.)
System No
Username
Password
Users
FIG. 33 displays the Users controls on the NMX-ENC WebConsole page. The Users controls allow you to enable user privileges on
the encoder.
Users tab
FIG. 34
The user privileges are as follows:
admin - This user is always enabled and cannot be disabled. Admin level has access to the entire operation of the encoder
and can configure all parameters on it.
user - This user can be enabled or disabled by an admin. User level can only control the items contained within the Encoder
Controls. Admin level can set a password for this level. All items in control tabs are read-only when logged in as a user.
guest - This user can be enabled or disabled by an admin. Admin level can set a password for this level. Guest level is
view-only and cannot control the encoder at all.
The following options are available on the Users tab:
Users Options
Enable
Change Password
Instruction Manual - NMX-ENC H.264 Encoder
Enter a system number in the provided field. This option is not available if you set the NetLinx Master
mode to Auto.
Enter the username for access to the NetLinx Master, if required by the Master.
Enter the password for access to the NetLinx Master, if required by the Master.
Click the box to enable privileges for the corresponding user level.
Click to enter a new password for the corresponding user level. Valid passwords are between 4 and 30
alpha-numeric characters including "-" and "_". To remove the password requirement for a user, leave
the password fields empty. Click Save to confirm the password change.
Web Configuration
37