Setting Of Country/Language (Maintenance Mode 52) - Brother MFC-J3520 Service Manual

1.3.14 Setting of Country/Language (Maintenance mode 52)

< Function >
Machines have been customized for their destination countries with the corresponding
EEPROM customizing codes (see
(Maintenance mode
more destination countries, so the machines customized by these codes require further
specifying individual destination countries or languages.
Note: This function applies to "France and surrounding areas," "Pan-Nordic," "Eastern
Europe," "Oceania," and "Iberia" only.
< Operating Procedure >
(1) Press the 5 and 2 keys in this order in the initial stage of the maintenance mode.
Wait for the "Press OK key" to appear on the LCD, then press the SET key.
(2) Select the country name of the user with the
to display "1.Yes 2.No."
(3) If the choice is correct, press Yes.
The machine displays "ACCEPTED" on the LCD, saves the new setting, and
returns to the standby state.
Section 1.3.27 "Customizing Destinations
74)"). However, some customizing codes are shared by two or
5-27
and keys and press the SET key
Confidential