Panel Unit (For Models Without Touch Panel); Panel Unit - Brother DCP-7080 Service Manual

9.15 Panel Unit (For models without touch panel)

9.15.1 Panel Unit

(1) Remove the four taptite cup B M3x10 screws.
(2) Release the claws to remove the panel unit. Disconnect the panel harness from the
panel PCB ASSY.
Note:
• When removing the panel unit, DO NOT pull the panel unit strongly because it is
connected to the panel harness.
Taptite cup B M3x10
Harness routing: Refer to
Panel harness
Panel PCB ASSY
Fig. 3-56
"9. Scanner unit".
3-61
Panel unit
Taptite cup B M3x10
Claws
Confidential