Sewing In The Manual Mode - Pfaff 3568-12/22 Instruction Manual

Programing
11

Sewing in the MANUAL mode

.05.02
11 - 14
Fig. 11 - 06
Insert workpiece and align (see chapter 10.08 Placement of the cuttings).
Select MANUAL mode.
Press start controls 1 at the same time (the function is dependent on the menu selection;
see chapter 8.06 Start controls).
Start the cycle of functions of the folder by pressing the folder movement key
repeatedly.
- Lower folder and table
- Engage folder slide, raise table, retract folder slide.
- Raise folder
- Swing transport arm with sewing jig to folder station; stacker functional
- Return folder
- Lower sewing jig
- Return pocket plate
- Swing transport arm with sewing jig to sewing station
Press key for program start (seam program is started).
1
1