Table of Contents
Advertisement
10
Entering the seam start and seam end in manual sewing mode
.01.01
After calling up the appropriate function, the menu for entering the placement stitch function
appears. To begin with the condensed stitches function is not activated.
If necessary, switch off the condensed stitches function
If necessary, switch on the placement stitch function and alter the value for the
placement stitch (using the number panel or arrow keys).
Switch on the condensed stitches function and call up the menu for entering the values.
or
Switch on the single start backtack function and call up the menu for entering the values.
or
Switch on the double start backtack function and call up the menu for entering the
values.
In each case change the number of stitches for the condensed stitches or the number of
backtack stitches with the appropriate arrow keys.
Change the value for the maximum speed during the condensed stitches or backtacking
operation.
Select whether the condensed stitches or backtacking operation should be carried out at
a fixed speed (standard symbol) or at a pedal-controlled speed (inverse symbol).
Conclude the input.
In the manual sewing mode, the functions for the seam end are entered in the same way as
those for the seam start (without placement stitch).
Sewing
10 - 3
Advertisement
Table of Contents
