Pfaff 3568-12/22 Instruction Manual page 98

Adjustment
13 - 27
7
9
1
2
0.5 mm
6
8
Fig. 13 - 25
Press clamp 9 up to the top.
Tighten screw 2, ensuring that the hollow shaft 4 does not have any lateral play.
Turn on thread trimmer manually.
Turn the handwheel until the trips 8 are positioned at the highest point of the release
olive 5.
By turning the tension release shaft (accessible via screwdriver through hollow shaft 4),
adjust the distance between the tension disks according to requirement 3.
Press crank 7 up to the top and tighten screw 1.
Grease release olive 5 lightly.
The clearance between the tension discs can be fine-tuned at eccentric pin 10
after nut 11 has been loosened.
5
0.5 mm
3
4