Safety Symbols - Pfaff 3568-12/22 Instruction Manual

Safety
1

Safety symbols

.03
1 - 2
Repair work and special maintenance work must only be carried out by specialists or
appropriately trained personnel!
For maintenance and repair work on pneumatic devices, the machine must be separated
from the source of pneumatic power! The only exceptions allowed are for adjustments
and function testing by appropriately trained personnel!
Work on electrical equipment must only be carried out by appropriately trained specialist
personnel!
Work is not permitted on parts and equipment which are connected to the power supply!
Exceptions to this are contained in the regulations EN 50110.
Modifications and alterations to the machine must only be carried out pursuant to all
relevant safety regulations!
Only spare parts which have been approved by us are to be used for repairs!
We expressly point out that any replacement parts or accessories not supplied by us
have not been tested and approved by us. The installation and/or use of any such
products may result in negative changes to the constructional characteristics of the
machine. We are not liable for any damage which may be caused by non-original parts.
Danger!
Points to be observed.
Danger of injury to operating and specialist personnel!