Table of Contents
Advertisement
10
Sewing
In the sewing mode all relevant settings for the sewing operation are displayed. Functions can
be switched on or off by pressing a key. Values for the most important parameters can be
changed directly.
In this mode a difference is made between manual sewing and programmed sewing. To
change from manual to programmed sewing, press the PM key. In programmed sewing the
text "PM" appears on the display. The program numbers 1 – 15 can each be used for one
seam program with up to 15 seam sections.
10
Manual sewing
.01
After the machine has been switched on (Chapter 7.01 Main switch) and the manual sewing
mode has been selected with the PM key, the display appears for entering the stitch length,
also see Chapter 9.07 Entering the stitch length.
If the backtack function is switched on, the display appears for entering the backtack values,
also see Chapter 9.08 Entering the start and end backtacks.
It is possible to switch from one display to the other by pressing the scroll key.
Further functions in manual sewing, also see Chapter 7.06.02 Function keys:
Sewing is carried out with the pedal functions, see Chapter 7.03 Pedal.
A
B
C
3
3
Start backtacks on/off
End backtacks on/off
Needle position raised on/off
Presser foot raised on/off
2.0
D
3
3
Presser foot raised at end of seam on/off
Thread trimming on/off
Reverse sewing on/off
Sensor on/off
Sewing
10 - 1
Advertisement
Table of Contents
