Pfaff 3568-12/22 Instruction Manual page 51

6- ZIGZAG DELAY ON
Displays the stitch count according to which the command "Zigzag on" is output before the
bar tack is started. The stitch count can be changed using the plus/minus keys or the
number keys (see Fig. 11.02).
. . .
7- ZIGZAG DELAY OFF
Displays the stitch count according to which the command "Zigzag off" is output before the
end of the bar tack. The stitch count can be changed using the plus/minus keys or the
number keys (see Fig. 11.02).
Delay
correct
Fig. 11 - 02
8- INTERMEDIATE STOP
When this function is selected, the display shows whether the function is on or off. In the
AUTOMATIC mode, the function causes a program stop after the folding operation is
completed. After pressing both start controls the program is continued. Via the number
keys 1 and/or 0, the function can be turned on or off.
9- PULLER
The puller is a work aid for stacking short workpieces.
When the function is selected, the display indicated whether this function is on or off. Via
the number keys 1 and/or 0, the function can be turned on or off.
0- PLAIN FABRIC
This function changes the foot switch and start control functions for processing plain fabric.
When the function is selected, the display indicates whether the function is on or off.
Via the number keys 1 and/or 0, the function can be turned on or off.
Zig-Zag on
Delay too Delay too
short, long,
increase stitch decrease
count stitch count
Due to the delay of the valve and cylinder, output of the commands for DELAY
ZIGZAG ON and OFF must be delayed as a function of the speed.
Programing
Zig-Zag off
Delay Delay too
correct short,
increase stitch
count
Fig. 11 - 03
Delay too
long,
decrease
stitch count
11 - 7