Sewing - Manual Mode - Pfaff 3819 series Instruction Manual

Production
10 Sewing – manual mode
.02
 Turn on the machine at the main switch and wait for it to be ready for operation.
 Press the "Insert tape" key. The needle and puller move to the top dead centre position.
 Feed the tape manually to below the puller rollers.
 Press the "Insert tape" key again. The needle and puller move to the working position.
 Press the "Free sewing" key.
 Press the "Tape cutter tape end" key and trim the tape.
 Now stop the machine with the needle down and raise the presser foot.
 The next piece can be sewn once the treadle is in the neutral position.
30
The following work steps assume that the sewing preparations listed in the
"Set-up" chapter have been carried out thoroughly.