Home Position Of The Transport Arm - Pfaff 3568-12/22 Instruction Manual

Adjustment
13

Home position of the transport arm

.08.02
13 - 43
Requirement
When lowered, the distance between the upper edge of the transport arm 4 and the
machine table at both end positions must be 100 mm.
5
1
2
6
Fig. 13 - 41
Turn stop 1 (nut 2) according to the requirement.
Detach pull rod 3.
Swing transport arm 4 to folding station.
Align carrier 5 (screws 6) according to the requirement.
Swing transport arm 4 back to the sewing station and recheck the distance to the
machine table.
Repeat this adjustment if necessary.
Connect pull rod 3.
6
6
3
4