Explanation Of The Menu Functions; Functions In The 1St Menu Level - Pfaff 3568-12/22 Instruction Manual

Programing
11

Explanation of the menu functions

.04
11

Functions in the 1st menu level

.04.01
1- PIECE COUNTER
Provides information on the current daily production (max. display value: 65565).
The value can be reset to "0" with the Clear key.
The value is not changed when the machine is turned off. If the max. display value is
exceeded, the counter is reset automatically.
2- BOBBIN PRESELECT
When the preset stitch count is reached, the machine stops automatically at the end of the
seam pattern to change the bobbin. When this function is selected, the value entered is
displayed.
The value can be changed using the plus/minus keys or the number keys.
3- TIME FOR FEED ROLLER
. . .
When this function is selected, the running time of the feed rollers for stacking is displayed
in seconds.
The running time can be changed via the plus/minus keys or the number keys. The running
time is a function of the length of the workpiece and should be set so that the pieces are
stacked in the middle of the stack trestle.
4- MAXIMUM SPEED
When this function is selected, the max. speed which has been set is displayed.
The value can be changed using the plus/minus keys or the number keys.
5- REDUCED SPEED
. . .
When this function is selected, the reduced speed which has been set is displayed.
The value can be changed using the plus/minus keys or the number keys.
11 - 6
workpieces
stack trestle
running time
correct
Fig. 11 - 01
increase running
time
decrease running
time