Programing
11
Examples for selecting functions
.03
11
Selecting a direct function
.03.01
To change the stitch length, for example, you must proceed as follows:
. . .
11
Selecting a function from the 1st menu level
.03.02
To activate the PLAIN MATERIAL function, it is necessary to proceed as follows:
11 - 4
Select INPUT mode.
Display:
"CHOOSE FUNCTION OR SCROLL
Press the stitch length change key.
e.g. Display: "PROGRAM:1
Enter the number of the program to be changed via the number keys (e.g. 34)
e.g. Display: "PROGRAM:34
Change the stitch length value using the plus/minus or the number keys.
e.g. Display: "PROGRAM:34
Confirm the entry with the Enter key.
Display:
"STITCH GENERATION RUNNING
The new stitch length value is assumed.
Display:
"CHOOSE FUNCTION OR SCROLL
Select INPUT mode.
Display:
"CHOOSE FUNCTION OR SCROLL
Scroll through the functions with the plus/minus keys until you find the display:
Display:
" 0- PLAIN FABRIC
Via the Enter key, enter the selected function.
(If the number key 0 is pressed, you will enter immediately from the basic position.)
Display:
"PLAIN FABRIC OFF
Press number key 1 to activate the function.
Display:
"PLAIN FABRIC ON
Confirm the entry with the Enter key.
Display:
"CHOOSE FUNCTION OR SCROLL
STICHL.3.20
STICHL.2.50
STICHL.2.80
(ON:1) #291"
(OFF:0)#292"
#250"
#262"
#262"
#262"
#264"
#250"
#250" (basic position 1st menu)
#260"
#250"