Headlight Lamp Replacement - Victory Motorcycles 2010 Victory Cross Roads Rider's Manual

9922671.book Page 205 Tuesday, June 16, 2009 12:06 PM

Headlight Lamp Replacement

High Intensity Discharge (HID) Lamps (Cross Country)
High intensity discharge lamps should be handled only by a trained technician wearing the
appropriate protective gear. See the VICTORY Service Manual or an authorized VICTORY
dealer.
Halogen Lamps (Cross Roads)
1. Unplug the wiring harness from the back of the headlight (lift the tab). Be sure to pull on
the connector, not on the wiring.
Tip: Avoid touching a halogen lamp with bare fingers. Oil from your skin leaves a residue, causing a hot
spot that will shorten the life of the lamp. If a lamp is touched, clean it thoroughly with denatured
alcohol.
2. Remove the spent lamp and install a new lamp.
3. Reinstall the wiring harness.
Maintenance
205