Side Covers - Victory Motorcycles 2010 Victory Cross Roads Rider's Manual

9922671.book Page 199 Tuesday, June 16, 2009 12:06 PM

Side Covers

Remove the left side cover to access the electronic con-
trol module, diagnostic connector and chassis-to-engine
harness connector.
Remove the right side cover to access the fuses, rear
suspension air fitting, clutch cable adjuster, purge valve
and flasher unit.
Remove both side covers to access the seat screws.
1. Pull outward at each corner of the side cover to dis-
engage the three darts.
2. Remove the side cover from the motorcycle.
3. To reinstall the side cover, make sure each rubber
grommet is properly positioned. Align each dart
with the appropriate grommet and press inward
firmly to secure each dart.
Maintenance
Grommets
199