Victory Motorcycles 2010 Victory Cross Roads Rider's Manual page 165

9922671.book Page 161 Tuesday, June 16, 2009 12:06 PM
Maintenance
Rear Suspension Adjustment
If the VICTORY air pump and gauge are not available, use the gauge provided in the tool
kit, and a pressurized air source with a maximum line pressure of 72 PSI (496 kPa). After
using this gauge, remove it quickly to minimize leakage. Expect to lose about 4 PSI (27.6
kPa) with each pressure check when using this gauge. Use only a dry air source, such as a
system with a water separator or air line dryer, to prevent moisture from entering the shock.
CAUTION! Air pressure increases VERY quickly when using pressurized air. Wear eye and face
protection.
161