Victory Motorcycles 2010 Victory Cross Roads Rider's Manual page 225

9922671.book Page 221 Tuesday, June 16, 2009 12:06 PM
Washing the Motorcycle
NOTICE: Do not use pressurized water to wash the motorcycle. Water may seep in and deteriorate
wheel bearings, brake caliper assemblies, brake master cylinders, electrical connectors,
steering head bearings, and transmission seals. Do not direct any water stream at air
intakes, exhaust outlets or electrical connectors.
Electrical components may be damaged by water. Do not allow water to contact electrical
components or connectors.
Do not use glass cleaners, water or soil repellents, and petroleum or alcohol based cleaners
on the windshield, as these products can damage the windshield.
1. Before washing, make sure exhaust pipes are cool. Cover each pipe opening with a plas-
tic bag secured with a strong rubber band. Check that the spark plugs, spark plug wire
caps, oil fill cap and fuel caps are properly seated.
Cleaning and Storage
221