Victory Motorcycles 2010 Victory Cross Roads Rider's Manual page 162

9922671.book Page 158 Tuesday, June 16, 2009 12:06 PM
Maintenance
Drive Belt / Rear Wheel Alignment
1. Look at the alignment reference marks
on each side of the swingarm and the
marks on the axle plates to verify proper
wheel alignment. Axle plate mark to ref-
erence mark alignment must be the same
on both sides.
2. If the marks are not aligned, perform all
steps of the Belt Tension Adjustment
procedure. See page 157.
3. Before and after tightening the axle nut,
verify proper belt tension and wheel
alignment.
158
Swing Arm
Marks
Axle Plate
Marks