Victory Motorcycles 2010 Victory Cross Roads Rider's Manual page 96

9922671.book Page 92 Tuesday, June 16, 2009 12:06 PM
Pre-Ride Inspections
Rear Brake Pedal
1. Press downward on the rear brake pedal. It
should move freely and smoothly. It
should not move more than 3/8 inch (8
mm) before resistance is firm. It should
continue to feel firm, without loss of pres-
sure, until the pedal is released.
2. Release the pedal. It should return to its
rest position quickly when released.
3. If the rear brake pedal fails to perform as
stated or travels too far before beginning
to engage the brake, service the brakes
before riding.
4. See page 76 for rear brake pedal adjust-
ments.
92
Resistance at 3/8 inch (8 mm)