Victory Motorcycles 2010 Victory Cross Roads Rider's Manual page 208

9922671.book Page 204 Tuesday, June 16, 2009 12:06 PM
Maintenance
Headlight Aim Adjustment (Cross Country)
1. To adjust the headlamp vertically, remove the headlight
bezel by pulling straight outward at the edges to release
the spring clips. Loosen the adjustment screws evenly to
adjust the beam downward. Tighten the adjustment
screws evenly to adjust the beam upward.
2. To adjust the headlamp horizontally, tighten one screw
and loosen the other equally. The beam will adjust to the
direction of the tighter screw.
3. Verify proper headlight aim. Readjust if necessary.
204
Adjustment
Screws