Victory Motorcycles 2010 Victory Cross Roads Rider's Manual page 211

9922671.book Page 207 Tuesday, June 16, 2009 12:06 PM
Fuse Replacement
Tip: Use the fuse puller provided in the tool kit to remove
a fuse.
1. Remove the right side cover.
2. Lift the release tab and slide the fuse box
upward to remove it from the bracket. Release
the tabs on each side of the fuse box cover and
remove the cover.
Tip: The reverse fuse (if equipped) is located on the
debris flap at the front of the rear tire.
3. Remove the damaged fuse and seat the new
fuse firmly in its place.
4. Reinstall the fuse box cover with the double
cut-out to the left (with print readable from
right side of motorcycle).
5. Reinstall the fuse box and the side cover.
Maintenance
Fuse Box
207