Headlight Beam Adjustment; Headlight Lamp Replacement - Victory Motorcycles 2009 Hammer Owner's Manual

MAINTENANCE

Headlight Beam Adjustment

1. To adjust the headlight beam vertically, hold the headlight firmly while
loosening the adjustment bolt (1). Adjust the headlight and hold it
firmly in position while tightening the bolt.
Torque: 35 ft-lbs (47.5 Nm)
2. To adjust the beam horizontally, loosen the nut (2). Adjust the headlight
and hold it in position while tightening the nut.
Torque: 28 ft-lbs (38 Nm)
3. Perform the headlight beam inspection (page 131) and readjust as needed.

Headlight Lamp Replacement

High intensity discharge lamps should be handled only by a trained
technician wearing the appropriate protective gear. See the VICTORY
Service Manual or an authorized VICTORY dealer.
132
1
2