Drive Belt Condition - Victory Motorcycles 2010 Victory Cross Roads Rider's Manual

9922671.book Page 150 Tuesday, June 16, 2009 12:06 PM
Maintenance

Drive Belt Condition

Replace the drive belt if it is cracked or has broken teeth or
frayed edges. No matter its condition, the drive belt should
be replaced at periodic intervals. See the VICTORY Service
Manual or an authorized VICTORY dealer.
DO NOT attempt to check belt tension if the belt has been
exposed to rain or washing within a 24 hour period or if the
belt is hot from riding. Allow the belt to cool down to
ambient temperature before measuring belt tension.
Replace the drive belt and both sprockets as a set if the
drive belt has over 5,000 miles (8,000 km) of service at the
time of damage or failure.
150