Step 3 Starting The Scan Job - Fuji Xerox ApeosPort C6550 I Quick Reference Manual

3 Basic Operations
3
4
5
3

Step 3 Starting the Scan Job

1
1
30
If the previous settings still remain,
press the <Clear All> button.
Specify the mailbox to save to.
Select the features to set from each
tab as necessary.
Press the <Start> button.
Important • If the document has been set
in the document feeder, do not
press the document while it is
being conveyed.
Note • If a problem occurs, an error
message appears in the touch
screen. Solve the problem in
accordance with the message.
• The following job
configurations can be
performed while scanning.
If You Have More Documents
If you have another document, select the [Next Original] on the touch screen while the
current document is being scanned. This allows you to scan several documents as one
set of data.
Up to 999 pages can be stored.
Note • If the number of document pages exceeds this maximum, then scanning stops. Follow the
displayed message, and either abort the operation, or save the scanned document data.
While documents are being scanned, select [Next Original].
Note • When using the document feeder, the machine waits for the next sets of documents after it
has finished scanning the first set.
• You can change the scan settings for the next document by selecting [Change Scan
Settings] displayed after selecting the [Next Original].
• When the above screen is displayed and no operation is performed during a certain period
of time, the machine automatically assumes that there are no more documents.
<Clear All> button
<Start> button