Replacing The Waste Toner Container - Fuji Xerox ApeosPort C6550 I Quick Reference Manual

5 Maintenance

Replacing the Waste Toner Container

1
5
2
3
54
When the waste toner container becomes full, a message appears on the touch screen.
If you continue copying or printing without replacing the waste toner container, a
message appears and the machine stops after copying or printing around 3,000 pages.
Warning
Never throw toner, a waste toner container, or a toner cartridge into a fire. Toner
can cause an explosion and you can get burnt.
Never use a vacuum cleaner when you clean spilled toner. It can cause explosion
as the toner fills the vacuum cleaner and gets sparks. Use a broom or a cloth
moistened with a neutral detergent.
Important • When replacing the waste toner container, toner may spill and dirty the floor. We
recommend laying paper on the floor beforehand.
• Used waste toner containers require special processing during disposal. Return them to our
Customer Support Center.
• The use of waste toner containers not recommended by Xerox may impair quality and
performance. Use only waste toner containers recommended by Xerox for the machine.
• Replace the waste toner container while the machine is on.
Note • The number of pages is for when A4 ( ) paper is used.
• The number of pages that you can copy or print is only an estimate and varies depending on
conditions such as the content, paper size, paper type, and the computer environment.
Make sure that the machine has
stopped before opening the front
cover.
Open the waste toner container
cover.
Grip the handle of the waste toner
container and pull out about half of
it.