Fuji Xerox ApeosPort C6550 I Quick Reference Manual page 27

4
Select the job to cancel, and then
select [Stop].
Changing the Number of Copies
You can change the number of copies during scanning or copying the document.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
Control Panel.
2
Select [Change Quantity].
3
Set the number of copies with the
numeric keypad.
4
Press the <Start> button.
Note
Interrupting the Copy Job
You can temporarily suspend the current continuous copy job to give another job higher
priority.
1
Press the <Interrupt> button.
Note
2
Load the interrupt document and set features if necessary.
3
Set the number of copies with the numeric keypad.
4
Press the <Start> button.
5
After you have finished making the interrupt copy, press the <Interrupt> button.
Note
6
Press the <Start> button.
• You can set the values greater than the number of copies that have already copied. If you
set the same value as the number of copies that have already copied, the copy job is not
executed.
• The interrupt indicator lights
up to indicate the machine is
in the job interrupt mode.
• The interrupt indicator goes out to indicate the interrupt is canceled.
• Remove the interrupt document from the document glass when using the document glass.
Copying
<Stop> button
3
<Interrupt> button
25