Optional Rear I/O Modules; Optional Extension Modules; Mechanical And Environmental Specifications - Advantech MIC-3397 User Manual

1.2.12

Optional Rear I/O Modules

The RIO-3317 & RIO-3315 series are the optional RTM (also known as rear I/O mod-
ule) for the MIC-3397.They offer a wide variety of I/O features, such as two or four
RJ45 LAN ports, two COM ports, one VGA ports, two USB2.0 ports, one P/S2 port, or
one Mini-SAS port on the certain model. They also come with on-board features such
as one USB2.0, two SATA or four SAS (SATA interfaces) on certain models.
Rear I/O modules are available with three different I/O options:
Table 1.4: RIO Configurations
Rear Panel
LAN
VGA
*
RIO-3317-
2 1
B1E
RIO-3317-
4 1
C1E
Note! 1.
1.2.13

Optional Extension Modules

The MIC-3314 is the optional Extension Module (XTM) on the second layer of MIC-
3397 series for dual-slot platform, to increase graphics features as one DVI-D dual
link port, one DVI-I single link port and two DP port by an assembled an E6760
added-in card as MXM type A form factor.
Table 1.5: The second layer XTM(8HP) Configurations
XTM Model Number
MIC-3314-xxx
1.2.14

Mechanical and Environmental Specifications

 Operating temperature: 0 ~ 55° C (32 ~ 122° F)
Note! The operating temperature range of the MIC-3397 depends on the
installed processor and the airflow through the chassis.For extended
temperature products please contact your ADVANTECH representative.
 Storage Temperature: -40 ~ 85° C (-40 ~ 185° F)
 Humidity: 95% @ 40° C (non-condensing)
 Humidity (Non-operating): 95% @ 60° C (non-condensing)

Vibration:
– 5 ~ 100 Hz, 2.0 Grms with CFast/SSD (without on-board 2.5" SATA HDD) on
4HP SKU
MIC-3397 User Manual
COM- COM- USB2.
PS/2
RJ45 DB9 0
1 1 1 2
1 1 NA 2
1 x RIO LAN port is switchable with front panel.
IO Panel
DVI-I single link
1
On board header/socket/connector
Mini USB2.
VGA COM SATA
SAS* 0
NA 1 NA NA 2
NA 1 NA 1 2
DVI-D dual link DP
1 2
6
SAS*
Slot
(SATA Conn.
width
Interface)
NA 1 J3/J5
NA 1 J3/J5
Added-in Card
E6760 MXM module
1