1.5.6
XTM Carrier Board (MIC-3314)
The MIC-3397 is configured with single and dual slot board widths; the second layer
XTM carrier board is MIC-3314, assembled with AMD Radeon E6760 MXM type A
form factor module and its heatsink. It provides up to four display outputs, two DP
ports, one single link DVI-I port and one dual link DVI-D port, with multi-display sup-
port, up to four display outputs simultaneously. Its high resolution parameter is usu-
ally used in image processing applications, with another two VGA ports from 4HP
front panel and rear I/O panel, which are able to provide up to six display outputs at
the same time by extended desktop.
1.5.7
Multi-Display Configuration
There are a total of six display outputs from MIC-3397 dual slots SKU, with SM750
GPU on 4HP and E6760 MXM type A graphic module on the second layer. Two VGA
from SM750, one DVI-D, one DVI-I and two DP from E6760.
Use SM750 or E6760 as main display, which can be configured as follows:
Controller on 4HP
SM750
Resolution
Controller on
MIC-3314
Resolution
Multi-display
Configuration A: six simultaneous outputs. One main display + five extended dis-
plays based on resolution 1360x768.
Figure 1.11 MIC-3397 Six Multi-display configuration
MIC-3397 User Manual
SM750GX160000-AC 265P, 16Mbytes of embedded 32-bit DDR
memory
Dual display: 1360x768 (Clone & extended mode)
Single display:1920x1080 (16bit, single mode only)
AMD Radeon E6760, 128-bit wide, 1 GB, GDDR5, 51.2 GB/s
DP: 4096 x 2160
Dual Link DVI-D: 2560 x 1600
Single Link DVI-I: 1920 x 1200
Max up to 6 multi-displays: (Clone mode/extended)
2xDP+1xDVI-D+1xDVI-I+2xVGA
14