Mic-3397 Upgrade From 4Hp To 8Hp Installation Steps - Advantech MIC-3397 User Manual

2. Insert Cfast into Cfast socket, then fasten with screw as below.
1.7.3

MIC-3397 Upgrade From 4HP to 8HP Installation Steps

The MIC-3397 supports 8HP configuration. The user can buy MIC-3314 assembly
board (including XTM carrier board, MXM module, heatsink) to upgrade from 4HP to
8HP; follow installation steps below.
1. Remove hotswap handle switch cable on top side, and uninstall the 2 VGA
posts from the front panel.
2. Remove two screws on the bottom side.
19 MIC-3397 User Manual