Boot Setting - Advantech MIC-3397 User Manual

2.3.4

Boot Setting


Setup Prompt Timeout
This option allows you to set the delay time before setup hotkey works.

Bootup NumLock State
This setting automatically turns on NumLock key when the system is booted.
The default setting is "on".

Quiet Boot
If this option is set to Disabled, the BIOS displays normal POST messages. If
enabled, an OEM Logo is shown instead of POST messages.

Fast Boot
This item allows BIOS to skip certain tests while booting. This will decrease the
time needed to boot the system.

Boot Mode Select
This item allows users to select boot mode as "Legacy or UEFI".

Fixed Boot Order Priorities
The option shows device boot priorities.
Figure 2.15 Boot setup
41 MIC-3397 User Manual