Install Flip Assembly; 7.15.1 Procedure To Install Flip Assembly - Motorola IDEN I580 Field Service Manual
Basic and field level test procedures digital multi-service, data-capable portable
Hide thumbs
Also See for IDEN I580:
- User manual (233 pages) ,
- User manual (220 pages) ,
- User manual (222 pages)
Table of Contents
Advertisement
PREPARING FOR FIELD LEVEL TESTING: Install Flip Assembly
7.15
Install Flip Assembly
7.15.1 Procedure to install flip assembly:
Tools: Black stick.
NOTE: Ensure the flip and housing pivot points are clean.
1. Insert the Hinge Assembly Mechanism into flip right knuckle. Gently press inward until seated
and ensure that the two surfaces are flush.
2. Carefully guide the flex connector through access slot in front housing.
3. Align flip assembly to front housing to resemble a semi closed position.
4. Slip the left knuckle side of the flip into position on the front housing.
5. Slip the right knuckle into the front housing.
56
2
4
Figure 7-10.
68P80401P05
Advertisement
Table of Contents
